11
  • Hall 11.0 / Booth Number 11-121
Moisture measurement system type Litronic-FMS II
Key Facts
  • Multiple measuring points: Up to 16 sensors can be installed on one evaluation unit.
  • Interfaces: Profibus, Profinet, Ethernet or analogue measured value transfer by 0-10 V 12 bit or 0/4-20 mA 12 bit are available for signal transfer to the higher-level control. Digital output and input modules are available for limit signalling and start/stop commands and material curve switching.
  • Cost saving: Time-consuming and costly laboratory analyses are no longer necessary or can be reduced.
Categories
Moisture measuring devices

Product information

A self-sufficient system with almost unlimited possibilities. The Litronic-FMS II type moisture measuring installation has been used for decades in a wide range of industries to measure the moisture content of various materials in real time.

At the beginning of each measurement section, the calibration per product must be carried out by means of reference procedures. The Litronic-FMS II software enables convenient and fast parameterisation.

The evaluation unit receives the raw values measured by the Liebherr sensors and immediately converts them into percentage humidity.

Thanks to the various interfaces, transfer to a higher-level control is possible.

Measurement by the Liebherr sensor system is based on the physical ...
Download